Personal tools
You are here: Home Forum Install & build Salome 8.3 and OpenSuse Leap 42.3

Salome 8.3 and OpenSuse Leap 42.3

Up to Install & build

Salome 8.3 and OpenSuse Leap 42.3

Posted by Tivadar Szavai at December 29. 2017

Hello Guys,

I successfully installed the universal package, but when I start it, the following happens:

It does not find naming service, and I have no clue what should I repair, since I am new to Salome platform. Have you experienced something like that before? Do you have suggestions what to do?

Kind Regards,

Tivadar

 

runSalome running on zivatar-laptop.WORKGROUP
Searching for a free port for naming service: 2815 - OK
Searching Naming Service ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Failed to narrow the root naming context
Traceback (most recent call last):
  File "/home/zivatar/salome/appli_V8_3_0/bin/salome/runSalome.py", line 625, in useSalome
    clt = startSalome(args, modules_list, modules_root_dir)
  File "/home/zivatar/salome/appli_V8_3_0/bin/salome/runSalome.py", line 422, in startSalome
    clt=orbmodule.client(args)
  File "/home/zivatar/salome/Salome-V8_3_0-univ-public/modules/KERNEL_V8_3_0/bin/salome/orbmodule.py", line 47, in __init__
    self.initNS(args or {})
  File "/home/zivatar/salome/Salome-V8_3_0-univ-public/modules/KERNEL_V8_3_0/bin/salome/orbmodule.py", line 86, in initNS
    sys.exit(1)
SystemExit: 1


--- Error during Salome launch ---

Re: Salome 8.3 and OpenSuse Leap 42.3

Posted by Roman NIKOLAEV at December 29. 2017

Hello Tivadar,

It seems that you try to execute SALOME on laptop without network connection. This is known bug and it is already corrected. This correction will be available with next version of SALOME.

At the moment as a workaround try to put the following lines into /etc/hosts file:

127.0.0.1 localhost

127.0.1.1 <your hostname>

Regards,

Roman.

Re: Salome 8.3 and OpenSuse Leap 42.3

Posted by Tivadar Szavai at December 30. 2017

Hello Roman,

Thank You for the answer!

I have done things as the followings are:

1., I edited the file, and of course I've had the localhost already, so I've put the second line.

2., I Rebooted the machine

, but it didn't solve the problem, the error is the same. By the way (I don't know whether it helps your work), that is interesting what I was faced when I checked firewall settings: I ran into this kind of issue:

https://forums.opensuse.org/showthread.php/509479-Getting-quot-Another-Firewall-Active-quot-message-when-no-firewall-running

Do You have other idea?

Thanks again, 

Tivadar

 

Re: Salome 8.3 and OpenSuse Leap 42.3

Posted by Tivadar Szavai at December 31. 2017

Pardon, I made a mistake when I answered: Did not use the reply button...

Anyway, I wish You all a Happy New Year Guys!

Previously Roman NIKOLAEV wrote:

Hello Tivadar,

It seems that you try to execute SALOME on laptop without network connection. This is known bug and it is already corrected. This correction will be available with next version of SALOME.

At the moment as a workaround try to put the following lines into /etc/hosts file:

127.0.0.1 localhost

127.0.1.1 <your hostname>

Regards,

Roman.

 

Re: Salome 8.3 and OpenSuse Leap 42.3

Posted by Roman NIKOLAEV at January 15. 2018

Hello Tivadar,

May be it makes sense temporary disable a firewall and try to execute SALOME without it.

 

Regards,

Roman.

Previously Tivadar Szavai wrote:

Hello Roman,

Thank You for the answer!

I have done things as the followings are:

1., I edited the file, and of course I've had the localhost already, so I've put the second line.

2., I Rebooted the machine

, but it didn't solve the problem, the error is the same. By the way (I don't know whether it helps your work), that is interesting what I was faced when I checked firewall settings: I ran into this kind of issue:

https://forums.opensuse.org/showthread.php/509479-Getting-quot-Another-Firewall-Active-quot-message-when-no-firewall-running

Do You have other idea?

Thanks again, 

Tivadar

 

 

Re: Salome 8.3 and OpenSuse Leap 42.3

Posted by Tivadar Szavai at January 23. 2018

Hello Guys,

Thank You!

I checked again the workaround suggested by Mr Roman, and THAT WORKS!!! I mistyped the hostname when I tried it last time :)

Anyway, the only interesting thing is the following message before it starts:

Searching for a free port for naming service: 2820 - OK
Searching Naming Service + found in 0.1 seconds
Searching /Kernel/Session in Naming Service +++Warning: this type (Study,objref) already exists, it will be ignored.
Warning: this type (pyobj,objref) already exists, it will be ignored.
 found in 1.5 seconds
Start SALOME, elapsed time :   1.7 seconds
****************************************************************
*    Warning: HEXABLOCKPLUGIN GUI resources are not found.
*    HEXABLOCKPLUGIN GUI will not be available.
****************************************************************
****************************************************************
*    Warning: HYBRIDPLUGIN GUI resources are not found.
*    HYBRIDPLUGIN GUI will not be available.
****************************************************************
****************************************************************
*    Warning: BLSURFPLUGIN GUI resources are not found.
*    BLSURFPLUGIN GUI will not be available.
****************************************************************
****************************************************************
*    Warning: HexoticPLUGIN GUI resources are not found.
*    HexoticPLUGIN GUI will not be available.
****************************************************************
****************************************************************
*    Warning: NETGENPLUGIN GUI resources are not found.
*    NETGENPLUGIN GUI will not be available.
****************************************************************
****************************************************************
*    Warning: GHS3DPLUGIN GUI resources are not found.
*    GHS3DPLUGIN GUI will not be available.
****************************************************************
TKOpenGl | Type: Error | ID: 0 | Severity: High | Message:
  Font 'Times-Bold' is broken or has incompatible format! File path: /usr/share/fonts/texlive-lm/ds=y:lmmono10-regular.otf

It looks like Salome is working, but I haven't checked those plugins yet.

 

Cheers,

Tivadar

 

Previously Roman NIKOLAEV wrote:

Hello Tivadar,

May be it makes sense temporary disable a firewall and try to execute SALOME without it.

 

Regards,

Roman.

Previously Tivadar Szavai wrote:

Hello Roman,

Thank You for the answer!

I have done things as the followings are:

1., I edited the file, and of course I've had the localhost already, so I've put the second line.

2., I Rebooted the machine

, but it didn't solve the problem, the error is the same. By the way (I don't know whether it helps your work), that is interesting what I was faced when I checked firewall settings: I ran into this kind of issue:

https://forums.opensuse.org/showthread.php/509479-Getting-quot-Another-Firewall-Active-quot-message-when-no-firewall-running

Do You have other idea?

Thanks again, 

Tivadar

 

 

 

Re: Salome 8.3 and OpenSuse Leap 42.3

Posted by oliva at February 19. 2018

Hi

I modified hosts file, but still error appeared:

 

runSalome running on linux-r3oe
Searching for a free port for naming service: 2811 - OK
Searching Naming Service ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++Failed to narrow the root naming context
Traceback (most recent call last):
  File "/opt/SalomeMeca/appli_V2017.0.2/bin/salome/runSalome.py", line 625, in useSalome
    clt = startSalome(args, modules_list, modules_root_dir)
  File "/opt/SalomeMeca/appli_V2017.0.2/bin/salome/runSalome.py", line 422, in startSalome
    clt=orbmodule.client(args)
  File "/opt/SalomeMeca/V2017.0.2/modules/KERNEL_V8_3_0/bin/salome/orbmodule.py", line 47, in __init__
    self.initNS(args or {})
  File "/opt/SalomeMeca/V2017.0.2/modules/KERNEL_V8_3_0/bin/salome/orbmodule.py", line 86, in initNS
    sys.exit(1)
SystemExit: 1


--- Error during Salome launch ---

 

Powered by Ploneboard
Document Actions